Question: What Does 20w50 Oil Mean?

Which oil is better 10w30 or 20w50?

Designations on the label — such as 10W30 or 20W50 — tell the oil’s viscosity.

In the owner’s manual, car manufacturers recommend oils for the brand new vehicle, and 10W30 is commonly used in new engines instead of heavier oils.

So, 10W30 oil has less viscosity (flows easier) when cold and hot than does 20W50..

Which is better 15w50 or 20w50?

20W50 will maintain its viscosity for longer running than a 15W50. Ofcourse, everybody knows that 15W50 viscosity is better suited than 20W50, but practically, because of more shearing in case of 15W50, 20W50 is better and that is why most companies make 20W50 and not 15W50 when it comes to mineral oils.

What happens if I use 0w20 instead of 5w30?

0w-20 is simply a different viscosity of oil. It won’t be an advantage to your engine if your manufacturer suggests you use 5w-30 and may indeed be a detriment to your engine. 0w-20 may be a recommended oil for certain conditions for your engine and may not be recommended for your engine.

What happens if you put 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Is 20w50 oil thicker than 10w30?

SAE 20W50 is thicker than 10W30, so it’ll be longer to reach your engine parts during cold start, but the 20W50 could give your engine extra protectiom when it’s heat and being used for long time running. The sound would be smoother than the 10W30 even you get less responsive on the acceleration.

What is 20w 50 oil used for?

SAE 20w-50 Oil – Conventional & High Mileage A SAE 20W-50 motor oil is typically used in older vehicles or in particularly warm climates. Castrol GTX 20W-50 has been specially formulated to help extend the life of your engine by keeping it free from sludge, even when operating in extremely high temperatures.

Which is better 10w40 or 20w50?

the huge problem is the other number though. The smaller number, (the 20 part of 20w-50) describes how the oil behaves at 40 deg C and a 20w at 40 deg C is about 10 times thicker than your engine wants. A 10w-40 is better at around 6 times thicker and a 0w-40 is much better at about 4 times thicker.

Will thicker oil damage my engine?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

Is 10w40 good for high mileage?

The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well. As long as you’re not hearing knocking or serious mechanical noises from the engine, the heavier oil should buy you many more miles of service from your vehicle.

Is Thicker oil better for older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well.

Is SAE 30 thicker than 20w50?

20w50 will be thinner when it is cold but at a 100 degrees it will be thicker than a 30 wieght.

Is 20w50 synthetic?

SAE 20W50 Synthetic Motor Oil. NEO SAE 20w-50 is designed for high performance engines of all kinds, and for any engine that is pushed to the limit of performance and temperature. Excellent for trailer towing in high temperatures and for racing engines, in any engine that can use this viscosity grade.

When should I use 20w50 oil?

20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

Can I use 20w50 oil instead of 5w30?

20w50 is actually thicker than 5w30. This will result in less fuel efficiency, less horsepower, and more engine damage because it will have to work harder to rotate. Trust the engineers that made your vehicle.

Is 20w50 good for high mileage?

Considerations. The viscosity level of engine oil 20W50 is geared toward racing engines, as opposed to high-mileage engines, that run extremely hot and need heavy load operation. … Since its viscosity is so great, it can drag down the functioning of the crankshaft, resulting in less horsepower.

When should I use 10w40 oil?

Overall the 10W30 will be the more appropriate oil for cold weather and non-performing engines while 10W40 is perfect for warmer temperatures and older vehicles.

What oil is best for older engines?

Full synthetic oils are always a good choice for older vehicles that have been used a lot. They are perfect for lubricating motor parts as they do it much better than any other oil.

Can I mix 20w50 with 10w30?

If you mix viscosity grades such as a 10W30 low-viscosity oil and a 20W50 higher-viscosity oil, it is reasonable to expect that the resulting product will have viscosity characteristics which are thicker than the 10W30, but thinner than the 20W50.