Quick Answer: Can You Put 2 Different Subs In The Same Box?

Can you wire a subwoofer to the both right and left channels?

To connect a subwoofer to its receiver, you can use an LFE input cable or an RCA line-in cable (used for left and right input options).

Assuming your subwoofer has the option to use an LFE input, this will be your best choice.

If not, then you will use an RCA input cable to connect to the left and right inputs..

Are 2 subs louder than 1?

It depends on how the coil of the subs handle power and on the mechanical aspects of the design as well. The 2 subs will probably be just a bit louder (you would need a meter to tell) because the single sub would be entering into power compression and becoming less efficient as you increase the power.

How long should I let my subs break in?

How long should a break-in period last? Some speaker manufacturers will recommend a break-in period of around 10 hours. That should be plenty of time to allow your subwoofer to get settled in, if you decide to do this at all.

Do subwoofers need to warm up?

Like breaking in the engine on a new car, it needs this brief warm-up period to adjust to its surroundings. Take the family out for dinner: This is an important part of break-in. … The dinner phase is two hours of aggressive break-in, before which even attempting to set-up and dial-in your sub is a waste of time.

Can you run a subwoofer without an amp?

Subwoofers are designed to increase the bass frequencies, resulting in a deep, thumping sound. In most cases, they are paired with an amplifier to boost the sound. If you do not have the funds for both components, you can still hook up a subwoofer without an amplifier; it simply involves a little more know-how.

Can a 12 inch sub fit in a 10 inch box?

Not likely. The box dimensions and port size are specific to not only the size of the subwoofer, but also the specific subwoofer. Two different 12″ subwoofers may have entirely different enclosure specifications, and almost always do.

Do subwoofers get louder as they break in?

Subwoofers should not get louder as they break-in. … You may even find that your manufacturer does not recommend a break-in process and instead has other recommendations for playing various sounds when you initially use your subwoofer and other speaker equipment.

Is it better to have 1 or 2 subwoofers?

Very often two or more smaller subwoofers will outperform a single larger unit. With more available headroom the bass quality will increase and there will be a sense of effortless bass due to reduced compression, lower distortion and greater dynamic range.

What’s better 2 10 inch subs or 1 12 inch sub?

Q: Which subwoofer will sound the deepest? … But, generally speaking, given adequate power, the two 10″ subs will sound a little cleaner and punch harder because their combined cone surface area yields more sound pressure. The single 12″ sub, however, may sound a little deeper.

Can you mix and match subwoofers?

As a general rule, we do not recommend mixing and matching different brands of speakers in a surround sound system. Even mixing different lines within a particular brand can present problems. … In fact, there is rarely any reason to keep your subwoofer the same brand as your main speakers, perhaps other than cosmetics.

Can you use 2 different subwoofers?

Yes. You can run two different subs. It’s optimal to run two of the same because in your case, the weaker sub may reach it’s limits before the stronger one.

How do I make my subs hit the hardest?

How to Make Subwoofers Hit HarderChoose the correct amplifier for the subwoofer. Every type of subwoofer requires a certain power output by an amplifier. … Install the subwoofer in a bandpass box. … Adjust the settings on the amplifier and stereo unit to accommodate the subwoofer.

Is it worth having 2 subwoofers?

The answer to this question is typically yes, assuming you’re comparing one vs. two subs of the exact same brand and model #. In almost all circumstances, installing multiple subwoofers in your theater room will yield significantly better and smoother bass response across a wider listening area due to modal averaging.

Can you connect a subwoofer to a 2 channel receiver?

Subwoofer connection to a two-channel system differs from the methods used in home theaters. AV receivers feature bass management to direct the low bass frequencies to the sub and the midrange and treble frequencies to the speakers. The subwoofer is hooked up to the receiver with a single interconnect cable.

What happens if you don’t break your subwoofer?

What can happen if you skip breaking in your subs? If you don’t allow for a break in period you could run into one of the issues below: Burned or unwound coil: Burned or unwound coils can be caused by the buildup of excess heat and a distorted signal. Stiff spiders leave you with less suspension travel or excursion.

Should I get 2 10s or 2 12s?

It takes a lot more power to power 2 12’s than 2 10’s. It is true that in general a 10″ sub is tigher and more crisp but a 12 will hit lower and harder.

How do I get more bass out of my subwoofer?

Just follow these simple steps for great bass:Remove the distortion.Flatten the signal, open the low-pass filter.Adjust the subwoofer gain and low-pass filter.Adjust the bass boost and subsonic filter.Match the subwoofer level to the receiver volume.