- What gauge wire should I use for speakers?
- Are expensive subwoofer cables worth it?
- Can you join speaker cable?
- Does cable length affect sound quality?
- Is thicker speaker cable better?
- Do gold plated audio cables make a difference?
- How long can you run a 3.5 mm audio cable?
- Can speaker cable be too thick?
- Do speaker cables matter?
- Why are speaker cables so expensive?
- How many hours break in speaker cables?
- Do speaker cables really make a difference?
- What is the best cable for audio?
- Does OFC cable make a difference?
- Do expensive audio cables make a difference?
What gauge wire should I use for speakers?
Thick wire (12 or 14 gauge) is recommended for long wire runs, high power applications, and low-impedance speakers (4 or 6 ohms).
For relatively short runs (less than 50 feet) to 8 ohm speakers, 16 gauge wire will usually do just fine.
It’s cost-effective and easy to work with..
Are expensive subwoofer cables worth it?
Any reasonably well made cable will work just as well as an expensive cable. Unless the cheap RCA cable you are using has very poor shielding and you wrap it around your power cords, it isn’t going to sound any different than an expensive cable.
Can you join speaker cable?
Now, there’s a way to splice speaker wires, and then there’s a better way. You could twist speaker wires together and use electrical tape. But tape wears out over time, and the smallest tug on the wires can easily separate that type (usually a Y) of connection. … Spool of speaker wire (matching gauge of existing wire)
Does cable length affect sound quality?
When long runs (of either interconnects or speaker cables) are used, cable quality becomes extra important. Due to the additional signal losses longer runs impose, the better the cable is at “protecting” the signal, the better will be the sound.
Is thicker speaker cable better?
It’s also important that the wire lengths to both speakers are the same to ensure they both have equal impedance values. The cross sectional area of the wire is referring to the thickness, or gauge, of the wire. The thicker a wire or the lower the gauge, the less resistance.
Do gold plated audio cables make a difference?
Gold is actually a worse conductor of electricity than copper, though in practice that matters little. The only real, physical reason to use gold is that unlike copper, it doesn’t tarnish. … So yes, gold-plated connectors offer a benefit, but it’s a marginal one at best.
How long can you run a 3.5 mm audio cable?
2.5mm, 3.5mm (also called headphone cables), and ¼” audio cables have a maximum distance of 150′ on average.
Can speaker cable be too thick?
Re: Can speaker wire be too thick? Strictly addressing what you are suggesting, no, thicker wire actually makes it easier for a low powered amp to run a speaker because the resistance per foot goes down as the wire gauge gets fatter. Whether it sounds better is a matter of taste.
Do speaker cables matter?
Speaker and RCA interconnect cables should serve two key functions: to pass the audio signal with absolute purity at full fidelity and to reject interference that can add noise to the signal. A high quality cable lets your system perform its best, while remaining faithful to the source material.
Why are speaker cables so expensive?
Cables inherently have a little inductance and capacitance, but since the ultimate goal is to have all frequencies arrive at the speaker at the same time, more expensive cables go the extra mile and take these factors into account. – Conductor material. The purer the conductor, the more it costs.
How many hours break in speaker cables?
They should be broken in after seven days. In general, portable cables take approximately 80 hours to break in if they are silver or 40 hours if they are copper. In general, digital cables take approximately 80 hours to break in if they are silver or 40 hours if they are copper.
Do speaker cables really make a difference?
Turns out, the cables just do not make an audible difference. … With noise, impulse response, and practical listening the data all said the same thing: the speaker cable, TS cable, and coathanger cables performed so well as to not make an audible difference from the consumer models, good or bad.
What is the best cable for audio?
The basics Both HDMI and optical pass digital audio from one device to another. Both are better than analog (the red and white cables). Both can pass multi-channel audio, like Dolby Digital. Both cables can be had pretty cheap.
Does OFC cable make a difference?
Another benefit of OFC wiring includes less oxidation. Oxidation reduces current-carrying efficiency of the wire. The only benefit of CCA wire is the lower price. Unfortunately, because of all of the limitations of CCA wire, the savings can seriously compromise the quality of your system.
Do expensive audio cables make a difference?
If you have a modest system, investing in expensive cables may not be the best way to spend your money. Cables make a difference, but it’s a smaller difference than upgrading speakers, electronics, or turntable systems. If you already have a really good system, cables are the next logical upgrade step.