When Should I Use 20w50 Oil?

Should I use thicker oil in a high mileage engine?

A: Yes.

This is a practical method to improve oil pressure in an older, high-mileage engine.

The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well..

Does thicker oil protect?

Use the oil required by the manufacturer, thicker oil does not necessarily provide more protection. Older engines with less precise tolerances sometimes required higher viscosity oils, especially at higher temperatures. Thicker oil is not always better.

Does thicker oil cause higher oil pressure?

Yes thicker oils will increase oil pressure, but will reduce engine horsepower. Excessive oil pressure may explode the oil filter, damage seals, blow out oil passage plugs or even damage bearings.

Will heavier oil hurt my engine?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

Can I use 20w50 oil instead of 5w30?

20w50 is actually thicker than 5w30. This will result in less fuel efficiency, less horsepower, and more engine damage because it will have to work harder to rotate. Trust the engineers that made your vehicle.

Is 20w 50 oil thick?

The “20W” indicates how quickly the engine will start when cold or in cold weather. The “50” refers to the thickness of the oil when the motor has been running for a while. 20W50 motor oil is relatively viscous and thick. Most modern oils are 10W40 or even 5W40.

Which is better 10w40 or 20w50?

the huge problem is the other number though. The smaller number, (the 20 part of 20w-50) describes how the oil behaves at 40 deg C and a 20w at 40 deg C is about 10 times thicker than your engine wants. A 10w-40 is better at around 6 times thicker and a 0w-40 is much better at about 4 times thicker.

Is Thicker oil better for older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well.

What is the thickest oil I can put in my car?

The thickest viscosity grade for automotive applications is a SAE 60 which has a viscosity between 21.9 and 26 cst at 100c. Pretty thick stuff. Used in older engines, large Diesel engines. Racing grades include 20w50s for older, air cooled engines.

What happens if engine oil is too thick?

If you use too thick of a motor oil for the conditions, your fuel mileage will likely suffer. This is because the thicker oil increases resistance on moving parts such as pistons. While your engine will be protected, it will be at the expense of more frequent trips to the gas station.

When should I use 10w40 oil?

Using 10w30 oil in cold weather will help reduce excessive oil temperatures and drag as the engine warms up. Using 10w40 oil in the summer will help the oil stick to internal components in high temperatures, avoiding the wear and tear from metal-to-metal contact between moving parts.

What is 20w 50 oil used for?

SAE 20w-50 Oil – Conventional & High Mileage A SAE 20W-50 motor oil is typically used in older vehicles or in particularly warm climates. Castrol GTX 20W-50 has been specially formulated to help extend the life of your engine by keeping it free from sludge, even when operating in extremely high temperatures.

Is 20w50 good for high mileage?

The viscosity level of engine oil 20W50 is geared toward racing engines, as opposed to high-mileage engines, that run extremely hot and need heavy load operation. … Since its viscosity is so great, it can drag down the functioning of the crankshaft, resulting in less horsepower.

Will 20w50 increase oil pressure?

With 10w30 the engine will produce a maximum of 55 psi of oil pressure at operating temperature. With 20w50 racing oil and the same operating conditions, it will produce 70 psi of oil pressure.

Which is better 15w40 or 20w50?

The higher the number, the higher the viscosity. In XX-W-XX multi-weight oils, the low # reflects the cold viscosity, the high # reflects the hot viscosity. 20w50 is thicker at both low and high temps than 15w40.